|
Detector:
- Irradiance W/ m²
- High Sensitivity
- Calibration in W/ m²
- 37mmØ; 32 mm Height
Device:
- Photocurrent to voltage converter with 8 decade stepped gain ranges from 0,1pA- 2mA
- Gain depending slew rate from 3ms- 20ms
- A/D converter with 100μs sampling rate
- CW/ Dose/ Peak to Peak/ Relative ratio/ Pulse synchronization
- Pulse Offset
- Adjustable integrating time from 100μs- 6s
- Signal conversion from 0.166 Hz to >300MHz
- Internal Datalogger
- Analogue Output
- LCD- display with LED backlight
- Operating Temperature: 5 to 40°C (41 to 104°F) (75 % rel. H, non-condensing). Storage Temperature: 0 to 50°C (32 to 122°F).
- Dimensions/ weight: 195 x 100 x 40 mm / 500 g (7.7 x 3.9 x 1.6 in /1.1 lb).
- Serial Port settings: RS232 (9600 baud, 8 data bits, 1 stop bit, no parity) 5 pin cylindrical TRIAD01 connector.
- Power supply: Battery or AC operation. Built-in rechargeable lead battery, 6V, 0.5 Ah. Approx 6 h with display illumination. Battery charge under 8 % is displayed. Operation from AC plug-in power supply 230V/50 Hz (other values on request) with specific U/I recharge characteristic
Accessories:
- Optionally RS232 Interface cable
- Optionally Windows based OS- P9710 Software
- Optionally BHO- Hard cases for safety transportation
|
 |