Gigahertz-Optik 徽标

快速联系

Gigahertz Optik GmbH (总部)
Phone: +49 (0)8193-93700-0
info@gigahertz-optik.de

观察名单

You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.

该产品已停产。可能仍有剩余库存。请参阅下面 "类似产品 "下的替代产品或直接联系我们

此停产产品的替代产品:

BN-0001

Calibration standard lamp for spectral irradiance. Features: 1000W tungsten halogen lamp. Burn-in certificate. Stable filament. Horizontal calibration from 250-2500nm with factory or DAkkS certificate.

BN-0001

Calibration standards 

Calibration standards enable the calibration and correction of measurement instruments to absolute measurement quantities. Calibration standards provide a reference signal corresponding to the measurement quantity to be calibrated. The reference signal of the calibration standard is calibrated in the respective measurement quantity. The calibration of the measurement instrument is performed by comparing the measurement signal of the measurement device with the standard specifications in the calibration certificate. Deviations are compensated for by comparison the measurement instrument accordingly. 

Spectral irradiance 

The spectral irradiance [W/m²·nm-1] is important for qualification of the incident radiant flux of a reference plane. Spectralradiometers are the typical measurement devices for the spectral irradiance. Calibration of the spectralradiometer is done using a calibration standard lamp for the irradiance.

BN-0001 calibration standard lamp 

Gigahertz-Optik GmbH offers the BN-0001 calibration standard lamp for applications where vertical alignment of the calibrating device is required. This has a 1000W DXW quartz halogen bulb for the usable spectral range between 250 and 2500nm. The lamp is firmly fixed into the socket. The electrical contact is installed through braze-welding. This sophisticated mounting and electrical connection ensures maximum position accuracy of the lamp and maintains a constant electrical resistance at the contacts. The standard lamp connection is done using robust ceramic terminal strips. Each standard lamp is burned-in before it is calibrated. The suitability of the lamp as a calibration standard is assessed based on its burn-in behavior.

BN-001Z-01 crosshair 

The BN-0001Z-01 crosshair is fastened onto the socket of the standard lamp using dowel pins. It enables precise alignment of the measurement instrument during calibration of the standard lamp and the calibrating measurement devices to the same point of the lamp filament.

Traceable factory calibrations 

The factory calibrations of the spectral irradiance from 250 to 1100nm are performed by Gigahertz-Optik’s calibration laboratory for optical radiation measurement quantities. The calibrations are traceable to calibration standards of Gigahertz-Optik’s calibration laboratory that is accredited by ISO/IEC 17025 (D-K-15047-01-00). Calibration and results of the calibration are confirmed by a calibration certificate conforming to the ISO 17025 specifications. 

Typical emission spectrum

Typical emission spectrum

BN-0001 with BN-0001Z-01 crosshair

BN-0001 with BN-0001Z-01 crosshair

类似产品/Similar Products

BN-0001
Calibration standard lamp for spectral irradiance