Gigahertz Optik logotipo

Contacto rápido

Gigahertz Optik GmbH (Sede central)
Teléfono: +49 (0)8193-93700-0
info@gigahertz-optik.de

Gigahertz-Optik, Inc. (Oficina de US)
Teléfono: +1-978-462-1818
info-us@gigahertz-optik.com

Lista de observación

You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.

Este producto ya no se fabrica. Es posible que queden existencias. Consulte las alternativas que figuran a continuación en "Productos similares" o póngase en contacto con nosotros directamente.

Productos alternativos para este producto descatalogado:

RCH-106

Detector head for high intensity irradiation in UV wide range curing processes

  • Separate light integrator and detector with rigid fiber coupling
  • (250-400)nm UV wide range responsivity
  • Cosine-corrected wide viewing angle
  • For the usage with optometers and amplifiers
  • Including calibration certificate.
RCH-106

In some UV curing applications, measurement of the UV irradiance in the widest possible UV spectral range is required. However, it is important that any visible light produced by the curing lamps should not be included in these measurements. See our application note about general UV curing measurements and our product overview about UV curing meters.


Product description RCH-106 irradiance detector

The RCH-106 UV detector was specially developed for use in UV radiation curing with gas discharge lamps. It offers all the features and functions of the detectors of the RCH series (see RCH-xxx Series). Its spectral responsivity was designed to cover the wide wavelength range from 250 nm to 400 nm. A lower level of absolute radiometric spectral responsivity is accepted. If necessary, correction factors for known emission spectra can be calculated.


Calibration

The detectors are calibrated with regard to their responsivity to irradiance and are supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.

Typical spectral sensitivity (relative) of the RCH-106 detectors

Typical spectral sensitivity (relative) of the RCH-106 detectors

RCH-106 detector with rigid light guide

RCH-106 detector with rigid light guide

Productos similares

RCH-106
Detector head for high intensity irradiation in UVA Peak light curing processes
RCH-106
Detector head for high intensity irradiation in blue-peak light curing processes
RCH-106
Detector head for high intensity irradiation in UV or blue light curing processes
RCH-106
UV Detectors for measuring the UV Curing Irradiance