Gigahertz Optik logotipo

Contacto rápido

Gigahertz Optik GmbH (Sede central)
Teléfono: +49 (0)8193-93700-0
info@gigahertz-optik.de

Gigahertz-Optik, Inc. (Oficina de US)
Teléfono: +1-978-462-1818
info-us@gigahertz-optik.com

Lista de observación

You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.

Este producto ya no se fabrica. Es posible que queden existencias. Consulte las alternativas que figuran a continuación en "Productos similares" o póngase en contacto con nosotros directamente.

Productos alternativos para este producto descatalogado:

RCH-019
UV detector for measuring the irradiance of UV curing LEDs
RCH-116
Detector head with rigid fiber for high intensity UV and BLUE LED sources.
RCH-xxx Series
UV Detectors for measuring the UV Curing Irradiance

RCH-119

UV detector for measuring the irradiance of UV curing LEDs

  • Separate light integrator and detector with rigid fiber coupling
  • UV-Blue LED optimized responsivity (330 nm to 480 nm)
  • Cosine-corrected wide viewing angle (low f2)
  • For the usage with Optometers, Amplifiers, Display Meters
  • Including calibration certificate
RCH-119

In UV curing applications requiring deep curing of adhesives and lacquers, radiation in the UV-A and blue (visible) spectral range is used to excite the photoinitiators. UV radiometers for applications in which LED technology is used for object irradiation must be designed and calibrated in such a way to ensure that the irradiance is correctly measured for the spectral emission range of the LED. See our application note about general UV curing measurements and our product overview about UV curing meters. Since the spectral range of UV LEDs is steadily increasing detectors need to follow this trend.


Product description RCH-119 irradiance detector

The RCH-119 UV detector was specially developed for use in UV radiation curing with LEDs. It offers all the features and functions of the RCH high temperature stable and flat design series. Its spectral responsivity covers the spectrally approximately flat wavelength range from 330 nm to 480 nm. The RCH-119 version is based on a rigid fiber.


Calibration

The detector is calibrated for typical UV LED wavelengths in terms of its spectral irradiance responsivity and is supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.

typical spectral sensitivity (relative) of the RCH-119 detector

typical spectral sensitivity (relative) of the RCH-119 detector

RCH-119 detector with rigid light guide

RCH-119 detector with rigid light guide

Productos similares

RCH-119
UV detector for measuring the irradiance of UV curing LEDs
RCH-119
Detector head with rigid fiber for high intensity UV and BLUE LED sources.
RCH-119
UV Detectors for measuring the UV Curing Irradiance