This Product is discontinued, please refer to the Alternatives shown below under Similar Products or contact us directly.
Alternative Products for this discontinued product:
Detector head for high intensity irradiation in UVA Peak light curing processes
- Separate light integrator and detector with rigid fiber coupling
- (320-390)nm UVABLUE responsivity
- Cosine-corrected wide viewing angle
- For the usage with optometers and amplifiers
- Including calibration certificate.
In UV curing applications requiring deep curing of adhesives and paints, longer-wave UV radiation in the UV-A and blue spectral regions is used to excite the photoinitiators. UV radiometers for these applications must be designed in such a way that they only measure the irradiance in the actinic range of the photoinitiators. See our application note about general UV curing measurements and our product overview about UV curing meters.
Product description RCH-108 irradiance detector
The RCH-108 UV detector was specially developed for use in UV curing with discharge lamps. It offers all the features and functions of the detectors of the RCH series (see RCH-xxx Series).Its spectral responsivity covers the wavelength range from 320 nm to 390 nm, which is used in particular for deep curing of adhesives and paints.
The detectors are calibrated with regard to their responsivity to irradiance and are supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.
Typical spectral sensitivity (relative) of the RCH-x08 detectors
Relative spectral responsivity of the RCH-x08 detectors together with the typical emission spectrum of a mercury lamp.
RCH-108 detector with rigid light guide