Gigahertz-Optik Logo

Quick Contact

Gigahertz Optik GmbH (Headquarter)
Phone: +49 (0)8193-93700-0
info@gigahertz-optik.de

Gigahertz-Optik, Inc. (US office)
Phone: +1-978-462-1818
info-us@gigahertz-optik.com

Watchlist

You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.

This Product is discontinued, please refer to the Alternatives shown below under Similar Products or contact us directly.

Alternative Products for this discontinued product:

UV-3718

Detector head for the measurement of high irradiance of UV-C 254nm radiation in W/m²

  • pre-aging for long time stability
  • cosine field-of-view
  • metal shielded cable
  • calibration certificate
UV-3718
The detector head UV-3718 is designed for narrow band UV-C 254 nm radiation sources with distinct 254 nm Peak Emission spectrum. Optical filters are used to shape the bare photodiode response to the desired spectral bandpass. 

Pre-aged Components 

All optical and optoelectronic components of the UV-3718 detector pre-aged by UV-C Radiation for extended long time stability.

Cosine Field-of-View

A cosine F.O.V. characteristic of the detectors spatial responsivity is effected by the diffusor window of UV-3718 detector. The diffursor window is made by UV stable RADIN material. . 

Designed for Wide Dynamic

The UV-3718 detectors is designed for the highest possible irradiance sensitivity for low irradiance level applications. However the wide range linearity of the photodiodes coupled with the Gigahertz-Optik optometers’s wide dynamic signal range amplifiers enable the UV-3718 detector to be used in applications with high irradiances as well. The upper range is limited only by the detector maximum operating current and its specified operation temperature. 

UV-C stable Housing and cable

The UV-3718 irradiance detector is built in a compact 37mm diameter black anodized aluminum housing. A side M6 tapped mounting hole allows the detector be fixed in place 

Traceable Calibrations 

Calibration of irradiance in W/m² and/or W/cm² as well as the detector's relative spectral responsivity is performed at Gigahertz-Optik’s Calibration Laboratory. Beside the regular calibration with spectral broadband reference lamps alternative calibrations with monochromatic or custom type reference lamps can be supplied as an option. The calibration and its traceability are confirmed in the calibration certificate supplied with each detector.

 

Typical Spectral Responsivity

Typical Spectral Responsivity

Similar Products

UV-3718
UV detector for UV-C LEDs and low-pressure Hg germicidal lamps
UV-3718
UV radiometer for germicidal UV-C 254nm mercury lamps
UV-3718
Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 250-400nm (UV), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.
UV-3718
Detector for the measurement of UV-C 254 nm irradiance in air disinfection applications
UV-3718
UV detector for germicidal lamps

Product Categories