Contact
Events
This Product is discontinued, please contact us if you are still interested. An alternative is e.g:

This Product is discontinued, please contact us if you are still interested. An alternative is e.g: ISD-5-Si.

Radiometer for Low and Medium Power Lasers

The X93 (Xnine three) meter is a compact lightweight radiometer for the measurement of Laser Power and Laser Power Density in W and W/m² within the wavelength range from 400 to 1100nm.

7mm Diameter Light Detection Area

The detector LP-9901-4 offers a low profile 8mm height housing with 7mm diameter measurement window for the measurement of laser power in mW and power density in mW/m². A 100mm long handle assists safe placement of the detector head in the measurement zone. Its power range varies with wavelength with a maximum of 100mW at 633nm.

50mm Diameter Integrating Sphere

The ISD-5-Si-4 (formerly model LP-9910-4) is built with a compact 50mm diameter integrating sphere with 12.5mm measurement port and a silicon photodiode detector. The +/-45° acceptance angle enables measurement of lasers and laser diodes with dispersed beams and reduces the need for perpendicular alignment of the laser to the detector.

Integrating Spheres Avoids Regular Reflection

The integrating sphere disperses the incoming laser beam which avoids resonance in the laser chamber a problem with plane detectors with reflective surface that can reflect the beam back into the laser chamber.

Traceable Calibration

Both detectors are calibrated for spectral sensitivity from 400 to 1100nm in 10nm wavelength steps as well as for power density. The calibration is traceable to international standards.

Simple to Use

The X93 meter is a handheld battery operated meter with 9 mm high character LCD display for easy viewing. Operating the X93 is simple. Hard-shell case is optionally available.

Custom Labeling Welcome

LP-9901-4 Flat Field Detector
ISD-5-Si-4 Integrating Sphere Detector
Specification
Design

Compact size hand-held housing

Display

6 character LCD, Character height 9mm. Indication of measurement quantity in W and W/m², cw or peak measurement mode, stop, battery low

Detector interface

ITT (-4) type connector.

CW

Continuous Mode with Run / Hold function (Snapshot) / Manual & Automatic Gain Selection

CW integration time

500 ms

Frequency Range

0.166 Hz to >300MHz

spectral range

Menu selected with arrow up and down

Measured Quantity

Menu selection of radiant power (W) and irradiance (W/cm²)

Parameter adjustment

Via RS232 interface

Front panel control

3 button system

Interface

RS232, 9600 Baud, 8 8D pin plug Hirose type 3260-8S1, Power supply option recommended for remote control operation

temperature range

Operation 5 to 40°C, Storage 0 to 50°C

Power Supply

9V one-piece battery, operating time about 100 hrs
Operation from AC plug-in power supply 230V/50Hz on option by erase of battery

LP-9901-4 1)

Radiant Power and Irradiance detector

spectral responsivity

400 to 1100nm, Wavelength depending sensitivity, Calibration in 10nm increments and the laser wavelength 441, 458, 473, 488, 496, 514, 532, 543, 568, 594, 612,633, 647 and 1064nm

Active Area

12.7mm diameter

ISD-5-Si-4 1)

Radiant Power detector with 50mm dia integrating sphere

compatible

compatible

Warranty

12 month

100mW with 0.00002mW display resolution at 633nm
30mW with 0.00002mW display resolution at 900nm

1)

For more specifications please check the LP-9901 and ISD-5-Si detector datasheet

2)

The measurement range may be limited by the detectors operation temperature

NULL
Measurement range NULL
Measurement modes NULL
Type Description File-Type Download
Datasheet X9-3 PDF
Produktname Product Image Description Show product
LP-9901 Detector head to measure LASER radiant power in W and LASER irradiance in W/m².

Features: Low height detector with 7mm dia active area, 400 to 1100nm, for the usage with optometers and signal amplifiers, calibration certificate.

ISD-5-Si Integrating sphere detector for Laser power in W.

Features: 50 mm dia, 12.5 mm dia port, BaSO4 coating, 400 nm - 1100 nm responsivity, for the usage with optometers and signal amplifiers, Calibration certificate

Article-Nr Modell Description Request / Compare
Product
100437 X9-3

Meter with battery and manual

Re-calibration
15300700 K-X9n-C

Electrical calibration of the X93 meter

15300700 K-LP9901-SD

Calibration of radiant power and irradiance from 400 to 1100nm in 10nm increments, Calibration certificate

15300483 K-ISD5Si-SD

Calibration of radiant power and irradiance from 400 to 1100nm in 10nm increments and additional Laser wavelength, Calibration certificate

Accessories
100480 LP-9901-4

Laser power and Irradiance detector, calibration certificate

100481 ISD-5-Si-4

Laser power detector, calibration certificate

100065 X9-Z01

RS232 interface adapter cable to connect the X9 meters with 9PIN SUB-D standard sockets on PCs

100299 X9-Z02

External power supply unit for the X9 meters including meter modification (chancels battery operation)

101122 X9-Z05

Plug-in power supply for main operation of the X9 optometer. Connected to the RS232 socket of the meter. Prevent the remote control operation via the RS232 interface. 100VAC - 240VAC; 5VDC

100010 BHO-01

Hard case to carry and store one X9-3 with ISD-5-Si-4

100020 BH0-05

Hard case to carry and store one X9-3 with LP-9901-4


Similar products

X1