Gigahertz-Optik Logo

Quick Contact

Gigahertz Optik GmbH (Headquarter)
Phone: +49 (0)8193-93700-0
info@gigahertz-optik.de

Gigahertz-Optik, Inc. (US office)
Phone: +1-978-462-1818
info-us@gigahertz-optik.com

Watchlist

You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.

This product is no longer manufactured. Remaining stock may still be available. Please refer to the alternatives listed below under "Similar products" or contact us directly.

Alternative Products for this discontinued product:

ISS-8P-HP

Integrating Sphere Source with Stepwise Intensity Control

  • 80mm sphere diameter, 19 mm  luminous port diameter, ODM98 coating, halogen lamp
  • Intensity control with OD0, OD1 and OD2 spectral neutral hole-patterns
  • Options: VA, VAM, different halogen lamps (10W or 100W), calibrations of luminance, spectral radiance, lamp power supply
ISS-8P-HP
The uniform light source ISS-8P-HP is based on a ODM98 coating and offers an 19 mm light entrance port. Furthermore the system is equipped with a LS-OK30 light source and a filter holder which (LS-OK30-HPA) can be loaded by an OD1 and OD2 filter.

Intensity adjustment

With the help of the filters OD1 and OD2 and an empty filter (OD0) the radiance/luminance of the sphere can be adjusted in three steps. A quality measure for the intensity adjustment is a constant color temperature and no change in the homogeneity of the light entrance port. Both are achieved by the ISS-8P. A typical application for this set-up is pixel-uniformity calibration of imaging systems at three different luminance or radiance levels. The filter exchange is faster  than intensity adjustment using a variable aperture.

The light source can be equipped with LF-F or LH-F-UV quartz halogen lamps in the range of 5 W to 100 W. The power will be selected according to the needed radiance/luminance.


Calibration

A calibration with included calibration certificate (cd/m²) and/or spectral radiance (W/(m²sr)) which is traceable to a national standard can be optionally purchased. The calibration is done by our internal calibration laboratory.


Option

For operation an optional quality current regulated power supply of the LPS series (e.g. LPS-100) can be used.

ISS-8P-HP

ISS-8P-HP

Similar Products

ISS-8P-HP
Integrating Sphere Source with Variable Intensity Control
ISS-8P-HP
Integrating Sphere Source with Variable and Stepwise Intensity Control
ISS-8P-HP
Uniform Integrating Sphere Source with Variable Intensity Control

Product Categories