This Product is discontinued, please refer to the Alternatives shown below under Similar Products or contact us directly.

Alternative Products for this discontinued product:

RCH-016

UV detector for measuring the irradiance of UV curing LEDs

Separate light integrator and detector with flexible fiber coupling
UV LED optimized responsivity (360 nm to 450 nm)
Cosine-corrected wide viewing angle (low f₂)
For the usage with Optometers, Amplifiers, Display Meters
Including calibration certificate

In UV curing applications requiring deep curing of adhesives and lacquers, radiation in the UV-A and blue (visible) spectral range is used to excite the photoinitiators. UV radiometers for applications in which LED technology is used for object irradiation must be designed and calibrated in such a way to ensure that the irradiance is correctly measured for the spectral emission range of the LED. See our application note about general UV curing measurements and our product overview about UV curing meters.

Product description RCH-016 irradiance detector

The RCH-016 UV detector was specially developed for use in UV radiation curing with UV-A LEDs. It offers all the features and functions of the RCH high temperature stable and flat design series. Its spectral responsivity covers the wavelength range from 360 to 450 nm and thus applications for deep curing of adhesives and lacquers.

Calibration

The detector is calibrated for 6 typical UV LED wavelengths in terms of its spectral irradiance responsivity and is supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.