This Product is discontinued, please refer to the Alternatives shown below under Similar Products or contact us directly.
Alternative Products for this discontinued product:
Optometer in 3HE Housing for use in 19” Racks
- Its USB and RS232 remote interface and two additional RS232 device interfaces make the device highly flexible when it comes to system integration
- Its four signal inputs enable use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik
The X1-RM combines the same powerful electronic design as the hand held meters in a rack-mountable housing for integration into 19” 3HE racks.
Simple to Use
Operating the X1 is simple. The meter set-up is supported by an easy to use menu. The menu allows selection of the operating mode, the detector and measurement parameter. Once set-up all settings are stored and recalled on next power-up unless reinitialized. Measurement values are displayed in absolute quantities for the particular detector connected.
The unique feature of all X1s is their capability to operate multi-cell detector heads with up to four photodiodes with all four signals displayed or read-out via the USB or RS232 interfaces.
Multipurpose Light Measurement Instrument
All X1s can be combined with most of the Gigahertz-Optik single cell or multi cell light detector heads for use in a wide application range of radiometric, photometric and colorimetric measurements.
|Measures respective of any offset and calibration factors programmed
|Accumulates the single readings as exposure for measured quantity
|CIE Yxy & T
|Measures the CIE Color Values Yxy & T
|CIE Yuv & T
|Measures the CIE Color Values Yuv & T
|Performs a zero adjustment of the internal amplifier and ADC
|Sets the measurement (integration) time
|Selects measurement mode (DC, Pulse Synchronisation, Peak-Peak)
|Sets max. dose measurement time
|Selects calibration data to calculate the measurement result
|Performs an automatic offset adjustment ("Offset = CW" or "Offset = 0")
|Sets the measurement range (auto, manual)